The Metz mecablitz 15 MS-1 digital that is intended to be directly mounted on the lens, is suitable for nearly all cameras – with models from Canon, Nikon, Olympus/Panasonic, Pentax/Samsung or Sony Alpha its remote TTL function first class user convenience.

High quality DOT matrix display	An infrared clip-on and three adapter rings: 52, 55 and 58 mm are included
bouncer disc for soft light conditions.	a practical & attractive belt pouch included

First class user convenience
The mecablitz 15 MS-1 digital lies snug in the hand. Small, light, handy – with a practical clip mechanism so it can be fixed to all standard lenses. With independent power supply, so that photographing is not disturbed by troublesome cables. In addition, an intuitive, attractive DOT matrix display makes the Metz mecablitz 15 MS-1 digital simplicity itself to use.

Versatile macro flash with TTL and slave with learning function
The remote TTL flash operation of the mecablitz 15 MS-1 digital can be used for digital cameras of the following makes: Canon, Nikon, Olympus/Panasonic, Pentax/Samsung and Sony-Alpha.
In this case, the camera must either have an integrated flash unit acting as master, or be equipped with add-on flash (e.g. Metz 58 AF-1 digital).
In slave mode, the mecablitz 15 MS-1 digital is also suitable for nearly all other makes of camera. Manual flash operation can be carried out via a synchronous cable. In addition, Metz mecablitz 15 MS-1 digital learns autonomously in the conventional slave mode! Its learning function ensures that the small slave flash is reliably triggered every time by the flash integrated in the camera – even if this sends out a ranging pre-flash. In individual cases, this specific cooperation is attained by trial triggering in slave mode. In this case, the light amount emitted can be varied across 6 light levels. The bouncer disc included in the scope of delivery performs especially valuable service by ensuring even illumination.
Rechargeable batteries or AAA batteries, compactly accommodated in the device, efficiently power the device. Equipped as standard with USB-interface for software updates via Internet. Adapter rings in the sizes 62, 67 and 72 mm are optionally available.

.

• Wireless TTL flash control
  
• Two reflector system, individually pivoting (0°, 10°, 20°) and separately controlled
  
• Ratio function (light distribution from left to right
  
• Horizontal (20°) pivoting reflector
  
• Dot matrix display
  
• Standard 50 mm illumination
  
• Enclosed bouncer disc for softer illumination
  
• Adjustable light (modelling light)
  
• Integrated autofocus auxiliary light
  
• Flash standby and exposure control indicator on flash unit
  
• Flash functions for specific camera models in remote TTL mode

Operates as slave flash unit in the following operating modes:
E-TTL – remote flash mode (Canon)
i-TTL- remote flash mode (Nikon / Fujifilm)
P-TTL remote flash mode (Pentax / Samsung)
Four-Thirds TTL remote flash mode (Olympus / Panasonic / Leica)
ADI remote flash mode (Sony Alpha)
Basic flash functions
TTL remote flash operating mode (as slave unit)
Slave flash mode with pre-flash suppression
Slave flash mode with learn function
Manual flash mode with 6 partial lighting levels
1st and 2nd shutter curtain synchronisation
Flash output
max. GN of 15 for ISO 100/21° and 50 mm
High number of flashes (e.g. 200 full flashes with NiMH batteries, 1000 mAh)
Flash recycle time 0.3 – 5 secs (depending on the energy source and flash output)